This documentation applies only Turris OS 3.x that is no longer present in newly sold routers. The new documentation is located at https://docs.turris.cz/.
Wake on LAN (WoL) is a tool which allows to remotely switch on a computer via an Ethernet network.
To be really possible to switch on the computer it has to be connected by a cable, its network adapter has to support this feature and it has to be enabled in BIOS.
You can find WoL in the section
Wake on LAN (
Wake on LAN in older versions). In
WoL program you choose one of the available programs. As noted in the manual, it's necessary to test first which program works for your device.
If you choose
Etherwake you should specify the
Network interface to use. In the standard Turris router configuration it is
eth1 accordingly to where the device is connected. Please consult the VLAN configuration page in our documentation. We need to mention that the general option
Broadcast on all interfaces doesn't work in our case and it's necessary to choose a specific network interface.
The last required item is the
Host to wake up. If you want to wake up a device which is routinely used you can probably find it in the list. In other cases it is possible to choose
– custom – and to fill in a MAC address in the format
Then you can click at
Wake up host and to wake up the desired machine.