User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:howto:mox_first_setup [2018/12/12 13:41]
jschlehofer
en:howto:mox_first_setup [2018/12/12 13:56]
klorenzova
Line 8: Line 8:
  
 If you would like to use Wi-Fi upgrade, plug it into the right module. If you would like to use Wi-Fi upgrade, plug it into the right module.
-  * Wi-Fi SDIO upgrade should be connected on SDIO pins on the main board of MOX A. SDIO Wi-Fi upgrade has pin header ​with 8 holes on one side and pin header ​with 6 holes on the other and you shouldn'​t swap it's sides.+  * Wi-Fi SDIO upgrade should be connected on SDIO pins on the main board of MOX A. SDIO Wi-Fi upgrade has pin header ​socket ​on one side and pin header ​socket ​on the other and you shouldn'​t swap it's sides.
   * Wi-Fi mPCIe upgrade should be connected in mPCIe slot on the main board og MOX B or G.   * Wi-Fi mPCIe upgrade should be connected in mPCIe slot on the main board og MOX B or G.
  
Line 27: Line 27:
 5. Connect the power supply to module A. 5. Connect the power supply to module A.
 <WRAP center alert 100%> <WRAP center alert 100%>
-Attention: Use only power adapter 12 V, 2.5 A.+Attention: Use power adapter 12 V, 2.5 A.
 </​WRAP>​ </​WRAP>​
  
 6. Wait few minutes for starting the device (and IP address configuration). Open an internet browser on your computer and point it to the address http://​192.168.1.1. Follow the first setup guide on your screen. 6. Wait few minutes for starting the device (and IP address configuration). Open an internet browser on your computer and point it to the address http://​192.168.1.1. Follow the first setup guide on your screen.