User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:howto:mox:mox-a-cpu [2019/05/06 19:06]
smocek
en:howto:mox:mox-a-cpu [2019/05/28 09:43] (current)
smocek
Line 1: Line 1:
-====== MOX A - CPU module ​======+====== MOX A - Basic ======
  
-The CPU module is the basic MOX module, which needs to be present in every MOX device. It contains the following:+The MOX A module is module ​with a CPU, which needs to be present in every MOX device. It contains the following:
  
   * ARMv8 A53 dual-core 1 GHz processor   * ARMv8 A53 dual-core 1 GHz processor
-  * 512MB DDR3/1GB DDR3 memory, the capacity of which cannot be increased after purchase +  * 512MB DDR3/1GB DDR3 memory ​(cannot be increased after purchase) 
-  * Moxtet system bus for connecting ​other modules+  * 64 pin female connector containing ​Moxtet system bus to connect ​other modules
   * 34-pin GPIO connector   * 34-pin GPIO connector
-  * SDIO bus for WiFi module connection+  * SDIO bus for WiFi addon
   * 8 pin PoE bracket   * 8 pin PoE bracket
-  * 64 pin female connector for connection additional modules 
   * SD slot for microSD cards with a capacity of at least 4GB (max up to 2TB), and write/read speed of up to 104 MB/s   * SD slot for microSD cards with a capacity of at least 4GB (max up to 2TB), and write/read speed of up to 104 MB/s
   * RJ-45 Ethernet port 1Gbps full duplex, 2 LEDs located on the cage.   * RJ-45 Ethernet port 1Gbps full duplex, 2 LEDs located on the cage.
   * Round power connector with internal diameter 2.1 mm, 12V, max 3.3A (parameters of the supplied source). Minus (negative) is on the outside connector, plus (positive) on the internal connector   * Round power connector with internal diameter 2.1 mm, 12V, max 3.3A (parameters of the supplied source). Minus (negative) is on the outside connector, plus (positive) on the internal connector
   * USB 3.0 port   * USB 3.0 port
-  * Fully programmable button, implicitly designed as an reset button.+  * Fully programmable button, implicitly designed as reset button.
   * Red status LED.   * Red status LED.
   * 2 years warranty   * 2 years warranty
-  * Ambient operating temperature 0°C-40°C (40°F-104°F) +
-  * Relative humidity 10%-90% RH, non-condensing+
  
 {{:​cs:​howto:​mox:​mox-a-cpu.png?​800|}} {{:​cs:​howto:​mox:​mox-a-cpu.png?​800|}}
  
-All ports and interfaces support the maximum bit rate of the interfaces concernedspeeds are not shared with other interfaces.+More technical specifications:​ 
 + 
 +  * Ambient operating temperature:​ 0°C-40°C (40°F-104°F) 
 +  * Relative humidity: 10%-90% RHnon-condensing 
 +  * Size: 110 mm x 58 mm x 27 mm (without case) 
 Module power consumption is between 2 and 3 watts. Module power consumption is between 2 and 3 watts.
  
Line 31: Line 34:
   * [[en:​howto:​mox:​mox-c-eth|MOX C (ETH)]] - TOPAZ module with 4x 1Gbps ethernet LAN ports   * [[en:​howto:​mox:​mox-c-eth|MOX C (ETH)]] - TOPAZ module with 4x 1Gbps ethernet LAN ports
   * [[en:​howto:​mox:​mox-d-sfp|MOX D (SFP)]] - SFP module with an optical port for up to 2,5 Gbps   * [[en:​howto:​mox:​mox-d-sfp|MOX D (SFP)]] - SFP module with an optical port for up to 2,5 Gbps
 +  * [[en:​howto:​mox:​mox-e-super-eth|MOX E (Super ETH)]] - Module with 8x ethernet LAN ports
 +  * [[en:​howto:​mox:​mox-f-usb|MOX F (USB)]] - extension module with USB ports
 +  * [[en:​howto:​mox:​mox-g-super-ext|MOX G (Super EXT)]] - extension module with a miniPCIe slot with more extension modules possibility
 +  * [[en:​howto:​mox:​upgrade|Upgrades]] - parts for upgrade