This article was tested only on Turris 1.x.
But it should work also on Turris Omnia.
What do you need to have?
In this article I will show you how to configure LTE USB modem Vodafone K5150.
Also I will also show you how to have mobile broandband as backup connection (failover).
Information about used LTE USB modem (which you can find by using SSH):
root@turris:~# lsusb Bus 001 Device 013: ID 12d1:1f16 Huawei Technologies Co., Ltd.
now you will need to check if
usbmode -l sees the modem
root@turris:~# usbmode -l Found device: 12d1:1f16 (Manufacturer: "Vodafone (Huawei)", Product: "K5150", Serial: "FFFFFFFFFFFFFFFF")
In PuTTY or Terminal log into your router and install these packages:
opkg install kmod-usb-net-cdc-ether kmod-usb-net-cdc-mbim kmod-usb-net-cdc-ncm kmod-usb-net-huawei-cdc-ncm umbim
wwan isn't supported in the advanced configuration interface called LuCI.
So I will show you 3 options.
1. In Windows you can use program WinSCP.
2. You can use
Before you will continue you would need to know APN. Your's mobile operator should tell you, what needs to be there. Usually it is something like
You will need to open file
/etc/config/network and to the end you will add this:
config interface 'lte' option proto 'wwan' option ifname 'wwan0' option apn 'internet'
Save it. Now you must assign LTE interface to the firewall.
Just copy&paste these rows to your's shell.
uci set network.lte=interface uci set network.lte.ifname='wwan0' uci set network.lte.proto='wwan' uci set network.lte.apn='internet' uci commit
Now you must assign LTE interface to the firewall.
LuCI interface (by default should be located on http://192.168.1.1/cgi-bin/luci ) →
Edit 2nd zone (should be wan) and check there lte interface.
Click Save & Apply
Now you should see how KB moves in RX and TX. You can also check it by disconnecting WAN cable.
/etc/config/firewall and locate
config zone, where under it should be: option name 'wan'
If there isn't option network then copy&paste like it is below.
If there is option network then you would need to add there interface
lte as it is below.
config zone should be same like this one
config zone option name 'wan' option input 'REJECT' option output 'ACCEPT' option forward 'REJECT' option masq '1' option mtu_fix '1' option network 'lte wan wan6'
When connection doesn't work you need to restart router.
On LTE modem we can see LED.
Green light means 3G connection. Purple means 4G connection.
Now if everything went well all your traffic between the router and the Internet should go through the LTE interface. That means that the connection through the WAN interface will not work. In the next step I will show you how to configure LTE as a backup connection.
Please go here, where it is explained: https://www.turris.cz/doc/en/howto/multiwan
Tested only on Turris 1.x. Should be similar to Turris Omnia.
When you have inserted microSD card to LTE modem, which is connected to the Turris router, you will need to check if router sees microSD card in LTE modem.
I will use SSH:
You should see similar output as I do.
root@turris:~# blkid /dev/mtdblock3: TYPE="squashfs" /dev/mmcblk0: PTUUID="3fee9afa" PTTYPE="dos" /dev/mmcblk0p1: SEC_TYPE="msdos" UUID="3462-1AE5" TYPE="vfat" PARTUUID="3fee9afa-01" /dev/mmcblk0p2: UUID="1acf499c-1067-4fe1-b1b7-af7dc884f7ae" UUID_SUB="fd211a80-da78-49fc-a7c2-f2ed2b840301" TYPE="btrfs" PARTUUID="3fee9afa-02" /dev/sda1: UUID="ED37-A894" TYPE="exfat"
Now we can see that microSD mounted is detected as
dev/sda and their type is:
By this command you can format it to ext4 file system
You can also use
LuCI to add new mount point in
(Turris 1.x owners can't add it through LuCI and will need to mount it manually)
or you can mount it manually
If you would like to have microSD card in folder
sd, which will be located in
First you will need to create folder
mount /dev/sda1 /mnt/sd
Now I will show you how to verify, if sd card is mounted how we wanted.
root@turris:~# df -h
Filesystem Size Used Available Use% Mounted on /dev/mmcblk0p2 119.1G 136.5M 118.0G 0% / tmpfs 1011.5M 1.7M 1009.8M 0% /tmp tmpfs 512.0K 4.0K 508.0K 1% /dev /dev/sda1 116.8G 60.0M 110.8G 0% /mnt/sd